KrosFlo.

FilterChat.com:   The Answers for All of Your Filtration Questions.


Close MessageUserDate(yyyy-mm-dd)
Previous Subject
Next Subject
ultrafiltration membranessantosh2001-01-25Click here to register.
Mostly the membranes are described by their MWCO, At what pressure does the cut off should take? 0.9(rejection) value or 90% rejection, what will happen to the rejection value,if we apply more pressure than it(at which we get 90% rejection)
Or is it possible if we apply more pressure then there is chances of permeating larger molecules also?
 
RE: ultrafiltration membranes
lil stevie2001-01-25Click here to register.
The MWCO of a UF membrane does not change significantly with changes in pressure, provided that it is properly supported. Different pressures are used to evaluate different membranes to control the water flux rate.

Using high pressures with a large MWCO membrane can cause a layer of retained proteins to form at the membrane surface. This gel layer can act as a filter and reduce the apparent MWCO of the UF membrane.

Using low pressures with a low MWCO membrane increases the time required for filtration.

Thanks for visiting.
  • To ask or answer a question, you need to register here.
  • You can browse by clicking on a message subject to see the complete message.
  • You can also search the messages on this board below.
  • If you have previously registered, you can log in below.


Message (click on a subject to view the messages)
Showing Oldest Message
Click for newer messages
NewestFirstLastNewer
Search for messages that contain  

You must register before asking a question or providing an answer.
You can click here to register. If you have already registered you can log in below.
(If you check the Use Cookies box then your computer will remember your log in name.)
User Name:
Password:


Click here if you previously registered and remember your user name but not your password.
Email us at drdavemc@lplc.com if you are having other problems.




Back to Top

All the Perl that's Practical to Extract and Report